| Version |
Changes |
| 2.0 |
1) Change model name to Umax S-6E.
Firmware v2.0 or later can only be controlled by VistaScan v2.3x+ or MagicScan v3.0x+. 2)
Solve the link problem with Performa 6400/5400: Speeded up SCSI response timing. 3) Return
home position instead of calibration position after scanning. Easier for user to lock
chassis. |
| 1.7 |
1) Solved speed problem with ADF (slowed down
ADF from 1250 to 1000 pps). 2) Modify the lamp intensity to improve image quality (reduce
the shading problem). Add power-saving function: lamp is turned off after 30 minutes of
inactivity. |
| 1.6 |
1) Improved the algorithm for calibration: i)
Avoid error code 21 & 22. ii) Improved preview image too light problem when cold
start. 2) Lighten the option LED when UTA or ADF is connected. 3) Show the error code
immediately while scanner self-tests error. 4) Modify the UTA lamp assembly to lock
position. Therefore, users can lock UTA (lamp assembly) after scanning or during ready
condition. 5) Solve image noise on the top of the scanned image and improve the image
quality. |
