|
| Version |
Changes |
4.40
070300 |
Adds support for Firewire/IEEE1394 interface,
new scanner models (PowerLook 1100, 2100XL) and Windows 2000 (high-end scanner models
only). Other minor fixes to be confirmed. |
4.3
210699 |
Maintenance release, includes pre-production
support for new scanner models (1600XL). Legacy 16-bit drivers and KPCMS-based matching
engine removed (now all ICM based). Add 16-bit/channel CMYK support to profile engine,
fixes memory leak problem, corrects default settings for auto/IPM mode, support for UMAX
PCI SCSI card (DMX3191D), fixes minor scan-to-file naming issue. This version included on
PhotoPerfect v4.3B CDs - we strongly recommend PhotoPerfect users upgrade to PP4.3A or
later, available from http://www.binuscan.com/. |
4.2.2
0599 |
Non-release version for pre-production 1600XL
testing, includes some bug fixes documented above in 4.3. |
4.2.1
0499 |
Minor fix to slightly improve sharpening
within PhotoPerfect Advanced or Master - included with PhotoPerfect version 4.3A. |
4.20
CD
011298 |
Adds support for AutoFocus feature of
PowerLook 3000 (F/W1.7 or later), reduces streaking (LBB error) caused by any dust in
calibration area, new MagicMatch engine with support for sRGB and LAB scan modes, support
for extended-bit TIFF format files in "scan to file" mode, improved preview
accuracy in lineart mode, correct CMYK values in info (pixel) tool from previews. Bug
fixes include correctly detecting if Kodak CMS is already installed (will install only if
older or nto present), in IPM correction mode fixes occasional problem changing between
percent and dimension scaling settings, improves compatibility with NT service packs.
Minor UI improvements such as option to apply colour enhancement to full preview, warning
when scanning >1220dpi in Low Lens mode (PowerLook 3000 only), improved histogram tool
(more accurate display of levels & gaps), auto-selection of 35mm slide tray now
functions if tray is off-centre. [source TU98018]. This driver is also included on IMC
TechAssist Service CD 1.00. |
4.10
CD
010598 |
Fixes 1200dpi/hi-lens PL3000 problem (also
requires F/W 1.4), fixes problem with Proof feature in IPM mode if image is rotated 90
degrees or flipped, fixes occasional problem of vertical line with PL3/PL3K, changes
default settings depending on scanner model, improved IPM compatibility, fixes problem of
GPF when changing to Neg mode if preview already made (GPF in MG_32, standalone
MagicScan), improves auto-cropping with 35mm slide tray on PL3K. Supports two focus modes
(with or without holder) with PowerLook 3000. Significant improvement in negative scan
quality (reduces over-contrast and over-saturation) with and without IPM correction
(PL3000). Resolves MagicMatch problem of printers listed several times. (Unofficially)
adds support for Astra 1220S (except in Scanner Test program? reported to
MN). [source MN 280498, BWjd] |
4.01
CD
210498 |
Fixes 4.0 bugs relating to Binuscan IPM
links, fixes image shift problem after scanning (inaccurate preview selection). See below
for release details. |
4.0
CD
210498 |
MagicScan 4.0 includes the following new
features: html on-line help and user guide, adds support for .icc colour matching on MacOS
and Win95, integrated link to Binuscan IPM (PhotoPerfect 4.0 or ColorPro 4.2 software
required), supports PowerLook 3000 & new tranny & neg frame holder sizes,
on-screen "proof" option for full-screen preview of image adjustments, scan
frame can be rotated to select non-aligned originals, job list window includes image
thumbnails, faster scanner calibration. Adds variable-resolution preview feature. Note:
does not support UC scanners, PowerLook I (officially, may require f/w x1.61), Gemini
(untested?).
Available for download (except Binuscan components). |
3.13
CD
221097 |
Solves image quality problem with PowerLook
III (only) (image too bright), fixes problem of scanning at 2400dpi >8.33" wide
(PowerLook III only).
Version 3.13 will be the last MagcScan release which supports the UC scanners and the
PowerLook (I) - owing to technical limitations of these models, the future MagicScan v4.0
release will only be compatible with later scanners. Version 3.1.3 is the minimum
recommended release for Windows 98 users, however earlier versions have been tested
succesfully. |
3.12
CD |
Solves Slide Tray detection error with
PowerLook III (only), increased timeout to allow for long scanner calibrations.
[This version will not be approved for UK release] |
3.11
CD |
Adds support for future product release
(PowerLook III) including support for 14/42bit scans, no changes that affect current
products.
[This version will not be approved for UK release] |
3.10
CD
160797 |
Adds support for Mirage IISE, include
MMX-specific code (NT only), improved negative scanning
Approved for UK release. |
3.02
CD |
Adds support for Mirage II; improved support
for slide trays; changes default highlight value settings. |
3.01
CD |
Fixes problem "Link or hardware
fail" or "Preview okay, fails to scan" when using Windows 95/NT &
TWAIN32 with an Adaptec SCSI card. Also available as an Update Diskette - replaces
ud32.dll. Fixes minor interface problem under NT4. |
3.0
CD |
New CD-only driver, includes plug-ins,
standalone scanning application (DA), tutorial, User Guides, Adobe Acrobat etc. Adds
support for Windows NT v3.51 & NT4.0 in main MagicScan driver (MagicScan NT driver now
discontinued). Improved driver structure & performance, modified user interface -
Scanner Control, Job List and Preview Image in separate windows, Preview window can be
resized; adds "Variations" style flip/rotate dialogue; discontinue MagicMatch
calibrate by scan target, MagicMatch Profile Pack now included with support for all
current scanner models. New MagicScan AutoScan driver; improve descreening with custom
line screen setting; improve interpolation algorithm; support network scanning. |
Note: Date shown with version number relates to
UK-approved release, not necessarily first appearance on internet or in other countries.
Released drivers are normally available for download, but may not be available from
Support on disk or CD, or immediately included with shipping units. |
HISTORICAL PAGE - NO LONGER UPDATED